Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 525)

Fabric OS Command Reference 495
53-1003131-01
interfaceShow
2
helloTID
Hello timer ID.
dbRtxTID
Database retransmission timer ID.
lsrRtxTID
LSR retransmission timer ID.
inactTo
Inactivity timeout value, in milliseconds. When this timeout expires, the adjacency
with the neighbor switch is broken and new paths are computed to all possible
destination switches in the fabric.
helloTo
Hello timeout value, in milliseconds. When this timeout expires, a Hello frame is
sent to the neighbor switch through this port.
rXmitTo
Retransmission timeout value, in milliseconds. It is used to transmit topology
information to the neighbor switch. If no acknowledgement is received within this
value, the frame is retransmitted.
nCmdAcc
Total number of commands accepted from the neighbor switch. Number includes
Hellos, Link State Updates (LSUs), and LSAs.
nInvCmd
Number of invalid commands received from the neighbor switch. Usually
commands with an FSPF version number higher than the one running on the local
switch.
nHloIn
Number of Hello frames received from the neighbor switch.
nInvHlo
Number of invalid Hello frames (Hello frames with invalid parameters) received
from the neighbor switch.
nLsuIn
Number of LSUs received from the neighbor switch.
nLsaIn
Number of LSAs received from the neighbor switch.
attHloOut
Number of attempted transmissions of Hello frames to the neighbor switch.
nHloOut
Number of Hello frames transmitted to the neighbor switch.
attLsuOut
Number of attempted transmissions of LSUs to the neighbor switch.
nLsuOut
Number of LSUs transmitted to the neighbor switch.
attLsaOut
Number of attempted transmissions of LSAs to the neighbor switch.
nLsaOut
Number of LSAs transmitted to the neighbor switch.
StuckCnt
Number of HLO timeouts that occurred before the port changed to the
NB_ST_FULL state.