Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 607)

Fabric OS Command Reference 577
53-1003131-01
mapsConfig
2
mapsConfig
Enables MAPS and sets other MAPS configurations.
SYNOPSIS
mapsconfig --enablemaps -policy policy_name
mapsconfig --fwconvert
mapsconfig --config pause -type member_type
-members member_list
mapsconfig --config continue -type member_type
-members member_list
mapsconfig --actions actions_list
mapsconfig --emailcfg -address email_address
mapsconfig --testmail [-subject subject] [-message msg]
mapsconfig --import flow_name [-force]
mapsconfig --deimport flow_name [-force]
mapsconfig --purge
mapsconfig --enableFPImon
mapsconfig --disableFPImon
mapsconfig --show
mapsconfig --help
DESCRIPTION
Use this command to perform the following Monitoring and Alerting Policy Suite (MAPS) functions:
•
Enable MAPS monitoring. This operation will disable Fabric Watch monitoring.
•
Convert Fabric Watch configuration to MAPS policies.
• Pause or continue monitoring specific elements.
• Define the list of allowable actions that can be taken on the switch when a threshold is triggered.
• Configure e-mail address to which the alerts must be delivered.
•
Import a flow.
•
Remove the imported flow from MAPS configuration.
•
Delete all user-defined MAPS configurations related to rules, groups, policies, and so on.
• Display MAPS settings.
• Enables FPI monitoring settings.
NOTES
MAPS Fabric Performance Impact monitoring will be disabled if legacy bottleneck monitoring is enabled.
Bottleneck monitoring needs to be disabled on every logical switch to configure Fabric Performance
Impact monitoring successfully.
This command requires a Fabric Vision license.