Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 66)

36 Fabric OS Command Reference
53-1003131-01
ag
2
0 4;6 None 4;6 1 0 2 SecondFabric
1 7;8;9 None 7;8;9 0 1 0 pg0
2 5;10;11 None 5;10;11 1 0 2 SecondFabric
3 12;13 None 12;13 0 1 0 pg0
------------------------------------------------------------------
To delete F_Port 5 that was mapped to N_Port 2:
switch:admin> ag --mapdel 2 "5"
Preferred N_port is set for F_Port[s]
Please delete it before removing primary N_Port
ERROR:Unable to remove F_Port[s] from mapping,
retry the command
switch:admin> ag --prefshow
F_Ports Preferred N_Port
-----------------------------------------------
10;11 0
4;5;6 2
7;8;9 3
----------------------------------------------
switch:admin> ag --prefdel 5 2
Preferred N_Port is deleted successfully \
for the F_Port[s]
switch:admin> ag --mapdel 2 "5"
F_Port to N_Port mapping has been updated successfully
To create and display a static mapping:
switch:admin> ag --staticadd 17 1
switch:admin> ag --show
N_Port information :
Port PortID Attached PWWN Attached_Switch
F-port\
-----------------------------------------------------\
0 0x010100 50:00:51:ed:6f:8e:60:28 Spirit \
17 0x010100 50:00:51:ed:6f:8e:60:28 Spirit \
Switch FO FB IP_Addr F_Ports
--------------------------------------------
0 1 1 10.17.31.170 4;5;23;
0 1 1 10.17.31.170 None
-------------------------------------------
F_Port information :
Port PortID Attached PWWN N_Port Preferred \
------------------------------------------------
4 0x010103 20:00:00:05:1e:85:92:88 0 \
5 0x010102 20:01:00:05:1e:85:92:88 0 \
N_port Login Exceeded?
-------------------------
None No
None No
---------------------------------------------------
N_Port Configured Current Failover Failback PG_ID PG_Name