Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 272)

242 Fabric OS Command Reference
53-1003131-01
diagHelp
2
diagHelp
Displays diagnostic command information.
SYNOPSIS
diaghelp
DESCRIPTION
Use this command to display a short description of diagnostic commands.
Use default operands when running diagnostics commands. Non-default settings require detailed
knowledge of the underlying hardware and are intended for support personnel only. Contact support if
you want to use these operands.
NOTES
The diagHelp command displays diagnostic commands that may not be available. Execute help
command to verify availability.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display diagnostic command information:
switch:admin> diaghelp
bpportloopbacktest Functional test of port via
blade processor path.
bpturboramtest MBIST test for AP blade BP ASICs
ceeportloopbacktest Functional test of port N->N path.
ceeturboramtest MBIST test for ASICs
(output truncated)
SEE ALSO
None