Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 526)

496 Fabric OS Command Reference
53-1003131-01
interfaceShow
2
state
Substate of the port. The port can be in one of the following 12 substates:
INIT (0)
The port is initializing.
ROUTABLE (1)
The port is ready to receive frames.
ROUTABLE_WAIT (2)
The port is waiting for notification from the neighbor.
ROUTABLE_SEND (3)
The port is preparing for local route update; negotiates for the necessary locks
before updating the routes.
ROUTABLE_TIMER (4)
The request for one or more locks failed; delay for a short interval before retrying.
DONE (5)
The port is online and in use.
DECOM_START (6)
The decommissioning request is sent to the neighbor and waiting for a response.
DECOM_WAIT (7)
Waiting for neighbor to remove routes using the interswitch link (ISL).
DECOM_SEND (8)
Preparing to update routes of the local port; negotiates for the necessary before
updating the routes.
DECOM_TIMER (9)
The request for one or more locks failed; delay for a short interval before retrying.
DECOM_DONE (10)
The local routes are updated; waiting for acknowledgement from the neighbor.
DECOM_BLOCK (11)
The local routes are updated; the neighbor sent acknowledgement.
chassis_lock
Internal variable
lock_request
Internal variable
nbr_lock_lock
Internal variable
r_rdy_rcvd
Indicates if the neighbor has reported as ready to receive frames.
nbr r_rdy flags
Internal flags reported by the neighbor.
lock_busy_cnt
Number of times a lock has reported as busy.
decom_active
Indicates if a decommissioning request is active on the port.
decom_initiator
Indicates if the local port is the decommissioning request initiator.
decom_active_port
Indicates the port for which the decommissioning request is active.