Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 167)

Brocade Mobility 7131 Access Point Product Reference Guide 155
53-1002517-01
5
8. Refer to the Radius Configuration field to define a primary and secondary Radius server port
and shared secret password.
9. Click OK to save any changes to the Hotspot Configuration screen. Navigating away from the
screen without clicking Apply results in all changes to the screens being lost.
10. Click Cancel (if necessary) to undo any changes made. Cancel reverts the settings displayed on
the Hotspot Configuration screen to the last saved configuration.
Defining the Hotspot White List
To host a Login, Welcome or Fail page on the external Web server, the IP address of that Web server
should be in access point’s White List.
NOTE
If using an external Web Server over the WAN port, and the hotspot’s HTTP pages (login or welcome)
redirect to the access point’s WAN IP address for CGI scripts, the IP address of the external Web
server and the access point’s WAN IP address should be entered in the White List.
Shared Secret Specify a shared secret for accounting authentication for the hotspot. The shared secret is
required to match the shared secret on the external Radius accounting server.
Timeout Set the timeout value in seconds (1-255) used to timeout users accessing the Radius
Accounting server if they have not successfully accessed the Accounting Server.
Retries Define the number of retries (1-10) the user is allowed to access the Radius Accounting
Server if the first attempt fails.
The default is 1.
Enable Radius
Authentication Select the Enable Radius Authentication checkbox to enable use of a RADIUS
Authentication Server for authentication of hotspot users. Disable this to use an external
server for authentication or use a hotspot without authentication.
Select mode Use the Select mode drop-down menu to define whether an Internal or External server is
to be used for the primary server.
Pri Server IP Define the IP address of the primary Radius server. This is the address of your first choice
for Radius server.
Pri Port Enter the TCP/IP port number for the server acting as the primary Radius server. The
default port is 1812.
Pri Secret Enter the shared secret password used with the primary Radius Server.
Sec Server IP Define the IP address of the secondary Radius server. This is the address of your second
choice for Radius server.
Sec Port Enter the TCP/IP port number for the server acting as the secondary Radius server. The
default port is 1812.
Sec Secret Enter the shared secret password used with the secondary Radius Server.