Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 300)

288 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Secondary DNS Server : 192.168.0.3
WINS Server : 192.168.0.255
admin(network.lan)>
For information on displaying LAN information using the applet (GUI), see Configuring the LAN
Interface on page 5-115.
br7131>admin(network.lan)>set
Description:
Sets the LAN parameters for the LAN port.
Syntax:
Example:
admin(network.lan)>
admin(network.lan)>
set lan 1 enable
admin(network.lan)>
set name 1 engineering
admin(network.lan)>
set ethernet-port-lan 1
admin(network.lan)>
set timeout 45
admin(network.lan)>
set trunking 1 disable
admin(network.lan)>
set native-vlan-tag 1 untagged
admin(network.lan)>
set auto-negotiation disable
admin(network.lan)>
set speed 100M
admin(network.lan)>
set duplex full
admin(network.lan)>
set dns 1 192.168.0.1
admin(network.lan)>set wins 1 192.168.0.254
admin(network.lan)>
set trunking disable
set lan <mode> Enables or disables the Mobility 7131 Access Point LAN interface.
name <idx-name > Defines the LAN name by index.
ethernet-port-lan <idx> Defines which LAN (LAN1 or LAN2) is active on the Ethernet port.
timeout <seconds> Sets the interval (in seconds) the Mobility 7131 Access Point uses to terminate its
LAN interface if no activity is detected for the specified interval.
trunking <mode> Enables or disables 802.11q Trunking over the Mobility 7131 Access Point LAN port.
native-vlan-tag <mode> Defines the untagged/tagged 802.1q native VLAN mode for LAN1 and LAN2.
auto-negotiation <mode> Enables or disables auto-negotiation for the access point LAN port.
speed <mbps> Defines the access point LAN port speed as either 10 Mbps or 100 Mbps.
duplex <mode> Defines the access port LAN port duplex as either half or full.
username <name> Specifies user name for 802.1x port authentication over the LAN interface.
passwd <password> The 0-32 character password for the username for the 802.1x port.
ip-mode <ip> Defines the Mobility 7131 Access Point LAN port IP mode.
ipadr <ip> Sets the IP address used by the LAN port.
mask <ip> Defines the IP address used for Mobility 7131 Access Point LAN port network mask.
dgw <ip> Sets the Gateway IP address used by the LAN port.
domain <name> Specifies the domain name used by the Mobility 7131 Access Point LAN port.
dns <ip> Sets the IP address of the primary and secondary DNS servers.
wins <ip> Defines the IP address of the WINS server used by the LAN port.