Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 332)

320 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
For an overview of the Wireless configuration options available to the using the applet (GUI), see
Enabling Wireless LANs (WLANs) on page 5-137.
br7131>admin(network.wireless.wlan)>show
Description:
Displays the Mobility 7131 Access Point’s current WLAN configuration.
Syntax:
Example:
admin(network.wireless.wlan)>
show summary
WLAN1
WLAN Name : Lobby
ESSID : 101
Radio Band(s) : 2.4 and 5.0 GHz
VLAN : <none>
Security Policy : Default
QoS Policy : Default
Rate Limiting : disabled
admin(network.wireless.wlan)>
show wlan 1
ESS Identifier : 101
WLAN Name : Lobby
802.11n (5.0 GHz) Radio : available
802.11n (2.4 GHz) Radio : not available
Client Bridge Mesh Backhaul : available
Hotspot : not available
Maximum MUs : 127
MU Idle Timeout : 30
Security Policy : Default
MU Access Control : Default
Kerberos User Name :
Kerberos Password : ********
disallow mu to mu : disable
Use Secure Beacon : disable
answer Broadcast ess : enable
QoS Policy : Default
per-mu rate limiting : disabled
per-mu rate limit (wired-to-wl) : 1000 kb
per-mu rate limit (wl-to-wired) : 1000 kb
For information on displaying WLAN infromation using the applet (GUI), see Enabling Wireless LANs
(WLANs) on page 5-137.
show summary Displays the current configuration for existing WLANs.
wlan <number> Displays the configuration for the requested WLAN (WLAN 1 through
16).