Br7131>admin(network.wan.vpn)>list, Description, Syntax: example – Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual
Page 323
Brocade Mobility 7131 Access Point Product Reference Guide
311
53-1002517-01
8
Eng2EngAnnex Manual 192.168.32.2/24
192.168.33.1
192.168.24.198
SJSharkey
Manual 206.107.22.45/27
206.107.22.2
209.235.12.55
admin(network.wan.vpn)>
delete Eng2EngAnnex
admin(network.wan.vpn)>
list
--------------------------------------------------------------------------
Tunnel Name
Type
Remote IP/Mask
Remote Gateway Local WAN IP
--------------------------------------------------------------------------
SJSharkey
Manual 206.107.22.45/27
206.107.22.2
209.235.12.55
admin(network.wan.vpn)>
For information on configuring VPN using the applet (GUI), see Configuring VPN Tunnels on page
6-216.
br7131>admin(network.wan.vpn)>list
Description:
Lists VPN tunnel entries.
Syntax:
Example:
admin(network.wan.vpn)>
list
--------------------------------------------------------------------------
Tunnel Name
Type
Remote IP/Mask
Remote Gateway Local WAN IP
--------------------------------------------------------------------------
Eng2EngAnnex Manual 192.168.32.2/24
192.168.33.1
192.168.24.198
SJSharkey
Manual 206.107.22.45/27
206.107.22.2
209.235.12.55
admin(network.wan.vpn)>
list SJSharkey
--------------------------------------------------------------------------
Detail listing of VPN entry:
--------------------------------------------------------------------------
Name
: SJSharkey
Local Subnet
: 1
Tunnel Type
: Manual
Remote IP
: 206.107.22.45
Remote IP Mask
: 255.255.255.224
Remote Security Gateway : 206.107.22.2
Local Security Gateway
: 209.239.160.55
AH Algorithm
: None
Encryption Type
: ESP
Encryption Algorithm
: DES
ESP Inbound SPI
: 0x00000100
ESP Outbound SPI
: 0x00000100
For information on displaying VPN information using the applet (GUI), see Viewing VPN Status on
page 6-230.
list
<cr>
Lists all tunnel entries.
<name>
Lists detailed information about tunnel named <name>. The <name> must match case
with the name of the VPN tunnel entry.