Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 388)

376 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Syntax:
Example:
admin(network.ipfilter)>
set
name : Sets name of IP Filters
protocol : Sets the protocol of the IP filter
port-start : Sets the starting port of the IP Filter
port-end : Sets the end port of the IP Filter
saddr-start : Sets the source address start of the IP Filter
saddr-end : Sets the source address end of the IP Filter
daddr-start : Sets the destination address start of the IP
Filter
daddr-end : Sets the destination address end of the IP Filter
admin(network.ipfilter)>
br7131>admin(network.ipfilter)>add
Description:
Adds a filter to the Global IP Filter table.
Syntax:
Example:
admin(network.ipfilter)>
set Sets Global IP Filter table entries.
add filter-name <name> Adds name to IP Filter (up to 20 characters).
protocol <loc> Adds protocol for IP Filter.
start-port <port> Adds a starting port for IP Filter.
end-port <port> Adds an ending port for IP Filter.
start-src-address <ip> Adds a starting source IP address for IP Filter.
end-src-address <ip> Adds an ending source IP address for IP Filter.
start-dest-address <ip> Adds a starting destination IP address for IP Filter.
end-dest-address <ip> Adds an ending destination IP address for IP Filter.