Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 370)

358 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Multicast (Mask) Address 1 01005E000000
Multicast (Mask) Address 2 09000E000000
WMM QOS Mode disable
WMM QOS Parameter Set 11ag-default
For information on configuring the WLAN QoS options available to the access point using the applet
(GUI), see Setting the WLAN Quality of Service (QoS) Policy on page 5-147.
br7131>admin(network.wireless.qos.create)>
Description:
Defines an Mobility 7131 Access Point QoS policy.
Syntax:
For information on configuring the WLAN QoS options available to the access point using the applet
(GUI), see Setting the WLAN Quality of Service (QoS) Policy on page 5-147.
br7131>admin(network.wireless.qos.edit)>
Descripton:
Edits the properties of an existing QoS policy.
Syntax:
show Displays QoS policy parameters.
set qos-name <index> Sets the QoS name for the specified index entry.
vop <index> Enables or disables support (by index) for legacy VOIP devices.
mcast <mac> Defines primary and secondary Multicast MAC address.
wmm-qos <index> Enables or disables the QoS policy index specified.
param-set <set-name> Defines the data type used with the qos policy and mesh network. When set
to a value other then manual, editing the access category values is not
necessary. Options include; 11g-default, 11b-default, 11g-wifi, 11b-wifi,
11g-voice, 11b-voice or manual for advanced users).
cwmin <access
category> <index> Defines Minimum Contention Window (CW-Min) for specified access
categoiry and index.
cwmax <access
category> <index> Defines Maximum Contention Window (CW-Max) for specified access
categoiry and index.
aifsn <access
category> <index> Sets Arbitrary Inter-Frame Space Number (AIFSN) for specified access
categoiry and index.
txops <access
category> <index> Configures Opportunity to Transmit Time (TXOPs Time) for specified access
categoiry and index.
default <index> Defines CWMIN, CWMAX, AIFSN and TXOPs default values.
add-policy Completes the policy edit and exits the session.
.. Cancels the changes and exits.
show Displays QoS policy parameters.