Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 304)

292 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
-----------------------------------------------------------------------------
1 1 VLAN_1
2 2 VLAN_2
3 3 VLAN_3
4 4 VLAN_4
admin(network.lan.wlan-mapping)>
show vlan-cfg
-----------------------------------------------------------------------------
LAN No. Management VLAN Tag Native VLAN Tag
-----------------------------------------------------------------------------
1 1 1
2 1 1
WLAN :WLAN1
mapped to VLAN :<none>
VLAN Mode :static
admin(network.lan.wlan-mapping)>
show lan-wlan
WLANs on LAN1:
:WLAN1
:WLAN2
:WLAN3
WLANs on LAN2:
admin(network.lan.wlan-mapping)>
show wlan
WLAN1:
WLAN Name :WLAN1
ESSID :101
Radio Bands :2.4 and 5.0 GHz
VLAN :
Security Policy :Default
QoS Policy :Default
Rate Limiting :disabled
For information on displaying the VLAN screens using the applet (GUI), see Configuring VLAN
Support on page 5-118.
br7131>admin(network.lan.wlan-mapping)>set
Description:
Sets VLAN parameters for the Mobility 7131 Access Point.
Syntax:
set mgmt- tag <id> Defines the Management VLAN tag index (1 or 2) to tag number (1-4095).
native-tag <id> Sets the Native VLAN tag index (1 or 2) to tag number (1-4095).
mode <wlan-idx> Sets WLAN VLAN mode (WLAN 1-16) to either dynamic or static.