Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 403)

Brocade Mobility 7131 Access Point Product Reference Guide 391
53-1002517-01
8
Example:
admin(system.cmgr)>
delself MyCert2
For information on configuring self certificate settings using the applet (GUI), see Creating Self
Certificates for Accessing the VPN on page 4-82.
br7131>admin(system.cmgr)>loadself
Description:
Loads a self certificate signed by the Certificate Authority.
Syntax:
For information on configuring self certificate settings using the applet (GUI), see Creating Self
Certificates for Accessing the VPN on page 4-82.
br7131>admin(system.cmgr)>listself
Description:
Lists the loaded self certificates.
Syntax:
For information on configuring self certificate settings using the applet (GUI), see Creating Self
Certificates for Accessing the VPN on page 4-82.
br7131>admin(system.cmgr)>loadca
Description:
Loads a trusted certificate from the Certificate Authority.
Syntax:
For information on configuring certificate settings using the applet (GUI), see Importing a CA
Certificate on page 4-81.
loadself <IDname> Load the self certificate signed by the CA with name <IDname> (7 characters).
listself Lists all self certificates that are loaded.
loadca Loads the trusted certificate (in PEM format) that is pasted into the command line.