Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 347)

Brocade Mobility 7131 Access Point Product Reference Guide 335
53-1002517-01
8
br7131>admin(network.wireless.security.edit)>
Description:
Edits the properties of a specific security policy.
Syntax:
Example:
admin(network.wireless.security)>
edit 1
admin(network.wireless.security.edit)>
show
Policy Name : Default
Authentication type : Manual Pre-shared key/No Authentication
Encryption type : no encryption
For information on configuring the encryption and authentication options available to the access
point using the applet (GUI), see Configuring Security Options on page 6-190.
br7131>admin(network.wireless.security)>delete
Description:
Deletes a specific security policy.
Syntax:
For information on configuring the encryption and authentication options available to the access
point using the applet (GUI), see Configuring Security Options on page 6-190.
show Displays the new or modified security policy parameters.
set <index> Edits security policy parameters. The values subject to modification, are the same ones
created using the br7131>admin(network.wireless.security)>create command.
change Completes policy changes and exits the session.
.. Cancels the changes made and exits the session.
delete <sec-name> Removes the specified security policy from the list of supported
policies.
<all> Removes all security policies except the default policy.