Br7131>admin(network.wan.vpn)>reset, Br7131>admin(network.wan.vpn)>stats, Br7131>admin(network.wan.vpn)>ikestate – Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual
Page 324: Description, Syntax: example
312
Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
br7131>admin(network.wan.vpn)>reset
Description:
Resets all of the Mobility 7131 Access Point’s VPN tunnels.
Syntax:
Example:
admin(network.wan.vpn)>
reset
VPN tunnels reset.
admin(network.wan.vpn)>
For information on configuring VPN using the applet (GUI), see Configuring VPN Tunnels on page
6-216.
br7131>admin(network.wan.vpn)>stats
Description:
Lists statistics for all active tunnels.
Syntax:
Example:
admin(network.wan.vpn)>
stats
-----------------------------------------------------------------------------
Tunnel Name
Status
SPI(OUT/IN)
Life Time
Bytes(Tx/Rx)
-----------------------------------------------------------------------------
Eng2EngAnnex Not Active
SJSharkey
Not Active
For information on displaying VPN information using the applet (GUI), see Viewing VPN Status on
page 6-230.
br7131>admin(network.wan.vpn)>ikestate
Description:
Displays statistics for all active tunnels using Internet Key Exchange (IKE).
reset
Resets all VPN tunnel states.
stats
Display statistics for all VPN tunnels.