Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 392)

380 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
br7131>admin(system)>show
Description:
Displays high-level system information helpful to differentiate this access point.
Syntax:
Example:
admin(system)>
show
system name : AP-71xx
system location : Atlanta Field Office
admin email address : [email protected]
system uptime : 0 days 4 hours 41 minutes
DNS Relay Mode : enable
SSLv2 support from HTTP server : enable
weak cipher support in SSL : enable
SSHv1 support : disable
led state : disable
AP-7131 firmware version : 4.4.0.0-069R
country code : us
ap-mode : independent
serial number : 05224520500336
model : br7131N
admin(system)>
For information on displaying System Settings using the applet (GUI), see Configuring System
Settings on page 4-67.
br7131>admin(system)>set
Description:
Sets Mobility 7131 Access Point system parameters.
Syntax:
show Displays Mobility 7131 Access Point system information.
set name <name> Sets the Mobility 7131 Access Point system name to <name> (1 to 59 characters).
The access point does not allow intermediate space characters between characters
within the system name. For example, “br7131 sales” must be changed to
“br7131sales” to be a valid system name.
loc <loc> Sets the Mobility 7131 Access Point system location to <loc> (1 to 59 characters).
email <email> Sets the Mobility 7131 Access Point admin email address to <email> (1 to 59
characters).