Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 256)

244 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
6
CAUTION
Windows Active Directory users must set their Login Attribute to “sAMAccountName” in order to
successfully login to the LDAP server.
3. Click Apply to save any changes to the LDAP screen. Navigating away from the screen without
clicking Apply results in all changes to the screen being lost.
4. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the LDAP screen to the last saved configuration.
5. Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout
before the applet is closed.
Configuring a Proxy Radius Server
The access point has the capability to proxy authentication requests to a remote Radius server
based on the suffix of the user ID (such as myisp.com or company.com). The access point supports
up to 10 proxy servers.
CAUTION
If using a proxy server for Radius authentication, the Data Source field within the Radius server
screen must be set to Local. If set to LDAP, the proxy server will not be successful when
performing the authentication. To verify the existing settings, see Configuring the Radius Server
on page 6-241.
CAUTION
When configuring the credentials of an MU, ensure its login (or user) name is a Fully Qualified
Domain Name (FQDN), or it cannot be authenticated by the access point’s proxy server. For
example; [email protected].
To configure the proxy Radius server for the Mobility 7131 Access Point:
1. Select System Configuration -> User Authentication -> RADIUS Server -> Proxy from the menu
tree.
Group Attribute Define the group attribute used by the LDAP server.
Group Filter Specify the group filters used by the LDAP server.
Group Member
Attribute Enter the Group Member Attribute sent to the LDAP server when authenticating users.