Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 410)

398 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
br7131>admin(system.snmp.access)>list
Description:
Lists SNMP access entries.
Syntax:
Example:
admin(system.snmp.access)>
list acl
----------------------------------------------------------------
index start ip end ip
----------------------------------------------------------------
1 209.236.24.1 209.236.24.46
admin(system.snmp.access)>
list v1v2c
----------------------------------------------------------------
index community access oid
----------------------------------------------------------------
1 public read only 1.3.6.1
2 private read/write 1.3.6.1
admin(system.snmp.access)>
list v3 2
index : 2
username : judy
access permission : read/write
object identifier : 1.3.6.1
security level : auth/priv
auth algorithm : md5
auth password : ********
privacy algorithm : des
privacy password : *******
For information on configuring SNMP access settings using the applet (GUI), see Configuring SNMP
Access Control on page 4-92.
System SNMP Traps Commands
br7131>admin(system.snmp.traps)
Description:
Displays the SNMP traps submenu. The items available under this command are shown below.
list acl Lists SNMP access control list entries.
v1v2c Lists SNMP v1/v2c configuration.
v3 <idx> Lists SNMP v3 user definition by index <idx> (1-10).
all Lists all SNMP v3 user definitions.