Description, Syntax: example – Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual
Page 338
326
Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
br7131>admin(network.wireless.wlan.hotspot.radius)>set
Description:
Sets the Radius hotspot configuration.
Syntax:
Example:
admin(network.wireless.wlan.hotspot.radius)>
set server 1 primary 157.235.121.1
admin(network.wireless.wlan.hotspot.radius)>
set port 1 primary 1812
admin(network.wireless.wlan.hotspot.radius)>
set secret 1 primary sjsharkey
admin(network.wireless.wlan.hotspot.radius)>
set acct-mode 1 enable
admin(network.wireless.wlan.hotspot.radius)>
set acct-server 1 157.235.14.14
admin(network.wireless.wlan.hotspot.radius)>
set acct-port 1 1812
admin(network.wireless.wlan.hotspot.radius)>
set acct-secret 1 londonfog
admin(network.wireless.wlan.hotspot.radius)>
set acct-timeout 1 25
admin(network.wireless.wlan.hotspot.radius)>
set acct-retry 1 10
admin(network.wireless.wlan.hotspot.radius)>
set sess-mode 1 enable
admin(network.wireless.wlan.hotspot.radius)>
set sess-timeout 1 15
admin(network.wireless.wlan.hotspot.radius)>
set auth-mode 1 enable
For information on configuring the Hotspot options available to the access ointusing the applet
(GUI), see Configuring WLAN Hotspot Support on page 5-152.
set
server
<idx>
<srvr_type>
<ipadr>
Sets the Radius hotpost server IP address per wlan index
(1-16)
port
<idx>
<srvr_type>
<port>
Sets the Radius hotpost server port per wlan index (1-16)
secret
<idx>
<srvr_type>
<secret>
Sets the Radius hotspot server shared secret password.
acct-mode
<idx>
<mode>
Sets the Radius hotspot server accounting mode
(enable/disable)
acct-server
<idx>
<ipadr>
Sets the Radius hotspot accounting server IP address per wlan
index (1-16).
acct-port
<idx>
<port>
Sets the Radius hotspot accounting server port per wlan index
(1-16).
acct-secret
<idx>
<secret>
Sets the Radius hotspot server shared secret password per
wlan index (1-16).
acct-timeout
<idx>
<timeout>
Sets the Radius hotspot server accounting timeout period in
seconds (1-25).
acct-retry
<idx>
<retry_count
>
Sets the Radius hotspot server accounting accounting retry
interval (1-10).
sess-mode
<idx>
<mode>
Enables or disbales the use of a hotspot timeout interval for
the specified wlan index (1-16).
sess-timeout
<idx>
<timeout>
Sets the Radius hotspot server timeout interval for the
specified index (1-16) between 15 - 180 minutes.
auth-mode
<idx>
<mode>
Enables or disbales use of RADIUS authentication for the
specified wlan index (1-16).