Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 381)

Brocade Mobility 7131 Access Point Product Reference Guide 369
53-1002517-01
8
NAT Timeout : 10 minutes
Configurable Firewall Filters:
ftp bounce attack filter : enable
syn flood attack filter : enable
unaligned ip timestamp filter : enable
source routing attack filter : enable
winnuke attack filter : enable
seq num prediction attack filter : enable
mime flood attack filter : enable
max mime header length : 8192 bytes
max mime headers : 16 headers
For information on configuring the Firewall options available to the access point using the applet
(GUI), see Configuring Firewall Settings on page 6-210.
br7131>admin(network.firewall)>set
Description:
Defines the Mobility 7131 Access Point firewall parameters.
Syntax:
Example:
admin(network.firewall)>
set mode enable
admin(network.firewall)>
set ftp enable
admin(network.firewall)>
set ip enable
admin(network.firewall)>
set seq enable
admin(network.firewall)>
set src enable
admin(network.firewall)>
set syn enable
admin(network.firewall)>
set win enable
admin(network.firewall)>
show
Firewall Status : enable
Override LAN to WAN Access : disable
set mode <mode> Enables or disables the firewall.
nat-timeout <interval> Defines the NAT timeout value.
syn <mode> Enables or disables SYN flood attack check.
src <mode> Enables or disables source routing check.
win <mode> Enables or disables Winnuke attack check.
ftp <mode> Enables or disables FTP bounce attack check.
ip <mode> Enables or disables IP unaligned timestamp check.
seq <mode> Enables or disables sequence number prediction check.
mime filter Enables or disables MIME flood attack check.
len <length> Sets the max header length in bytes as specified by <length>
(with value in range
256 - 34463 ).
hdr <count> Sets the max number of headers as specified in <count>
(with value in range
12 - 34463 ).