Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 440)

428 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
br7131>admin(system.config)>set
Description:
Sets the import/export parameters.
Syntax:
Example:
admin(system.config)>
set server 192.168.22.12
admin(system.config)>
set user myadmin
admin(system.config>
set passwd georges
admin(system.config)>
show
cfg filename : cfg.txt
cfg filepath :
ftp/tftp server ip address : 192.168.22.12
ftp user name : myadmin
ftp password : *******
For configuration file creation and export, only the set radio-config is supported. Therefore, when
configuration files for export are created, a line such as set rf-function X wips / wlan
(where X is 1 or 2) is never be generated.
For configuration file import, the legacy command set rf-function X wips / wlan is
processed as it has historically.
There is no CLI menu allowing the user to enter set rf-function X wips/wlan (where X is
1 or 2).
Instead, the command set radio-configX (where X is 1,2,3,4,5,6,7, or 8) is created in the
configuration files for export.
For information on importing/exporting access point configurations using the applet (GUI), see
Importing/Exporting Configurations on page 4-104.
br7131>admin(system.config)>export
Description:
Exports the configuration from the system.
set file <filename> Sets the configuration file name (1 to 39 characters in length).
path <path> Defines the path used for the configuration file upload.
server <ipaddress> Sets the FTP/TFTP server IP address.
user <username> Sets the FTP user name (1 to 39 characters in length).
passwd <pswd> Sets the FTP password (1 to 39 characters in length).