Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 345)

Brocade Mobility 7131 Access Point Product Reference Guide 333
53-1002517-01
8
port <sidx> <port> Sets the radius server <sidx> ( 1 -primary or
2 -secondary) <port> (1-65535).
secret <sidx> <secret> Sets the EAP shared secret <secret> ( 1 - 63
characters) for server <sidx> ( 1 -primary or
2 -secondary).
The default password is “admin123” .
reauth mode <mode> Enables or disables EAP reauthentication.
period <time> Sets the reauthentication period <period> in
seconds (
30 - 9999 ).
retry <number> Sets the maximum number of reauthentication
retries <retry> (
1 - 99 ).
accounting mode <mode> Enable or disable Radius accounting.
server <ip> Set external Radius server IP address.
port <port> Set external Radius server port number.
secret <secret> Set external Radius server shared secret
password.
timeout <period> Defines MU timout period in seconds (1-255).
retry <number> Sets the maximum number of MU retries to
<retry> ( 1 - 10 ).
syslog <mode> Enable or disable syslog messages.
ip <ip> Defines syslog server IP address.
adv mu-quiet <time> Set the EAP MU/supplicant quiet period to
<time> seconds (
1 - 65535 ).
mu-timeout <timeout> Sets the EAP MU/supplicant timeout in
seconds
(
1 - 255 ).
mu-tx <time> Sets the EAP MU/supplicant TX period <time>
in seconds (
1 - 65535 ).
mu-retry <count> Sets the EAP maximum number of MU
retries to <count> (
1 - 10 ).
svr-timeout <time> Sets the server timeout <time> in seconds
(
1 - 255 ).
svr-retry <count> Sets the maximum number of server retries to
<count> (
1 - 255 ).
Note: The WEP authentication mechanism
saves up to four different keys (one for each
WLAN). It is not requirement to set all keys, but
you must associate a WLAN with the same
keys.
enc <idx> <type> Sets the encryption type to <type> (one of
none , wep40 , wep104 , keyguard , tkip , or
ccmp ) for WLAN <idx>.
wep-keygu
ard passkey <passkey> The passkey used as a text abbreviation for the
entire key length (
4-32 ).
index <key index> Selects the WEP/KeyGuard key (from one of
the four potential values of <key index> (
1 - 4 ).
hex-key <kidx> <key string> Sets the WEP/KeyGuard key for key index
<kidx> ( 1 - 4 ) for WLAN <kidx> to <key string>.
ascii-key <kidx> <key string> Sets the WEP/KeyGuard key for key index
<kidx> ( 1 - 4 ) for WLAN <kidx> to <key string>.
mixed-mode <mode> Enables or disables interoperation with
WEP128 clients.