GW Instek GLC-9000 User Manual - Manual (Page 105)

SYSTEM SETTINGS
105
Delete Data 1. Press the 1 st or 2 nd Delete key
to delete either all the saved
data or all the panel settings.
Delete
Restore Default
Settings 1. To restore factory default
settings, press Restore.
Restore
2. Chose Yes to accept or No to
cancel restoring the factory
default settings.
Yes
OR
No
Factory Default Settings:
No. Item Setting No. Item Setting
1 Brand GW 12 Beep setting
2 Language English -Key input ON
3 Baud rate 115200 -Judgment FAIL
4 GPIB
address 10 -110%
Voltage ON
5 Current DC -Output of
T2 ON
6 Range AUTO 13 AUTO meas
7 Limits -Item ON(all)
-Upper 20mA -Wait time 1 second
-Lower 4uA -Meas Time 2 seconds
8 MD E 14 LCD Backlight ON
9 Class I -Delay time 10 minutes
10 Leakage Earth Leak 15 Meter DC
11 EUT outlet Line(right)
Neutral(left)
-SELF OFF