GW Instek GLC-9000 User Manual - Manual (Page 44)

GLC-9000 User Manual
44
Medical Equipment
MD-F
CLASS I CLASS II Internal Power
Type B Type F* Type B Type F* Type B Type F*
Earth leakage current Not Used N/A N/A
Enclosure and
earth leakage
current Normal T2 T2 T2 T2 T2 T2
Fault T2,T3 T2,T3 T2,T3 T2,T3 T2,T3 T2,T3
Enclosure and
enclosure leakage
current Normal T1,T2 T1,T2 T1,T2 T1,T2 T1,T2 T1,T2
Fault T1~3 T1~3 T1~3 T1~3 T1~3 T1~3
Patient auxiliary current T1,T2 T1,T2 T1,T2 T1,T2 T1,T2 T1,T2
Patient leakage current I T2 T2 T2 T2 T1,T2 T1,T2
Patient leakage current II T2,T3 N/A T2,T3 N/A T2,T3 N/A
Patient leakage current III N/A T2 N/A T2 N/A T2
*Type F = Type BF and Type CF.
Earth Leakage Current
Network N/A.
Connection 1. Connect the EUT power cord to the GLC-9000
as shown in the diagram below.
Measurement
Setup Confirm all settings including MD, leakage current
mode, measurement time, upper and lower limits,
and other parameters.