KROHNE Summit 8800 Vol 2 - Manual (Page 128)

128 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 RUN SWITCHING 07
Figure 129 Stream run switching valve control
Control run flow valve If the flow control valve is to be controlled – yes or no
Run flow control reverse If the flow control valve is permitted to work with reverse
flow
Run flow control keypad setpoint User defined setpoint for flow
Run flow control Pband Time based on present error
Run flow control Iaction Accumulation of past errors
Run flow control Daction Prediction of future errors
Run flow control minimum output level Minimum flow output limit from valve
Run flow control maximum output level Maximum flow output limit from valve
7 .4 Run switching I/O selections
Figure 130 Run switching digital input selection
Inputs required
Local > stream n > run switching > inlet / outlet / prover inlet valve
Run inlet open feedback Open status received from the valve.
Run inlet close feedback Closed status received from the valve.
Run inlet failure feedback Failure indication received from the valve
Run inlet automatic feedback Mode selection received from the valve