KROHNE Summit 8800 Vol 2 - Manual (Page 139)

139 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 PROVER 10
10 .1 .4 Prover options
Liquid Gas Steam
Figure 142 Prover options: general
This page deals with detailed prover parameters which are used to determine the following:
Prover type Select prover used, for gas master meter only.
Number of streams The number of streams connected to the prover application (1-5)
Number of points Number of proving points (1-20), so at how many flow rates must be proved
Maximum runs Maximum number of runs allowed during a proving
Maximum failed runs Maximum number of failed runs allowed before the prove is aborted
Update meter MF or K-factor update to meter
PID between runs Release of PID valves between prover runs – yes or no
Valves on failure Option to replace valves should the prove fail – yes or no
10 .1 .4 .1 General
Proving points
If more than one proving point is selected the user will be displayed with an additional section to
be able to enter at what flow rates must be proved: