KROHNE Summit 8800 Vol 2 - Manual (Page 66)

66 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 HARDWARE DETAILS 05
Figure 51 Temperature serial input selection
In certain meters, such as in the Coriolis meter, there is also the meter temperature. If this is
included in the modbus master protocol of that meter, the same variable as for modbus slave is
used. So although this is a fixed protocol which cannot be changed, the serial temperature can
then still be used.
5 .2 .3 Pressure Transmitter
An important measurement for a flow computer is the pressure, specifically for gas. This can be
used for the correction (compensation) of flow, as well as density correction which is required
according to certain standards.
The SUMMIT can handle 1 to 3 transmitters per stream:
Figure 52 Stream and station pressure selection in Hardware input