KROHNE Summit 8800 Vol 2 - Manual (Page 148)

148 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 PROVER 10
Figure 156 Prover line and base density
As they are identical to the stream density configuration.
10 .2 Modbus link to stream flow computers
In case a dedicated prover computer is connected to multiple stream flow computers, then a
pulse bus and an RS485 Modbus communications link needs to be setup, with the prover as the
master and the stream flow computers as the slave. To setup a modbus master and slave, see
volume 3.
There is a Modbus slave file included in the program files directory:
C:\Program Files (x86)\Krohne\SUMMIT 8800 Configuration\modbus
This file can be import to the Modbus slave configuration to automatically configure all neces-
sary data for the steam flow computers.
Under modbus addresses, press import and select the correct file: