5 .3 flow and totals output – KROHNE Summit 8800 Vol 2 User Manual
Page 70
70
www.krohne.com
08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800
HARDWARE DETAILS
05
The types of input signal available are as follows:
Temperature
• HART
• Analog (4-20mA)
• PRT
• Serial
Pressure
• HART
• Analog (4-20mA)
• Serial
Configuration is very similar to the normal temperature and pressure as per Figure 49 to Figure
53.
5 .3 Flow and totals output
The SUMMIT can use the outputs for a wide variety of internal values, including stream and sta-
tion flow and totals.
Figure 59 Stream and station ouput selection
The types of output signal available are as follows:
• Pulse
• Analog (4-20mA)
• Serial
Figure 60 Analog and digital pulse output
The variables can also be written serially via a modbus slave link for instance to a SCADA sys-
tem. See volume 3 for details how to configure a modbus slave.