Badger Meter SRD/SRI Valve Positioners - Manual (Page 39)

Figure 21: Pressure sensors
STARTUP
TO AVOID ANY PERSONAL INJURY OR PROPERTY DAMAGE FROM SUDDEN OR FAST MOVEMENT, DURING
CONFIGURATION AND AUTOSTART:
DO NOT PUT YOUR FINGER OR OTHER PART AT ANY TIME INSIDE THE VALVE OR IN ANY MOVING PART OF THE
ACTUATOR. DO NOT PUT YOUR FINGER OR OTHER PART AT ANY TIME IN THE FEEDBACK LEVER MECHANISM. DO NOT
TOUCH THE REAR PART OF THE POSITIONER AT ANY TIME.
ENSURE YOU THAT PNEUMATIC CONNECTION IS MADE ACCORDING TO “PNEUMATIC CONNECTIONS”.
General
Check the nameplate with respect to indications referring to Ex / non- Ex, input signal, communication, output signal, single /
double acting, additional inputs / outputs
Setting by Means of Local Keys
The SRD991 can be adjusted by means of a local keypad when the cover is off
M (Menu)
start menu / end menu
UP / DOWN counting up/down of menu numbers resp parameter numbers
UP + DOWN simultaneously: confirm at start, or when entering, storing, or verifying
M + UP + DOWN simultaneously: Reset = new start of SRD, thereafter initialization 1)
1) The stored data of the positioner is not affected, and remains unchanged
Startup
Page 39 August 2014 POS-UM-00010-EN-03