Badger Meter SRD/SRI Valve Positioners - Manual (Page 43)

Operation with Local Keys
With LCD
• Press M to enter the Menu mode Menu 1 appears
• Press UP or DOWN to select the desired Menu item Each press of the key moves one menu item forward (or back)
• Press UP+DOWN together to confirm the selected menu item and enter the Parameter change mode for the selected
menu item
• To exit the Menu mode, press M again
If the device remains in the Menu mode, it still is OUT OF SERVICE and AUTOSTART has to be initiated
If the device is IN OPERATION, the display with the valve position appears
If you select a menu but press no other keys for a few moments, the SRD switches automatically back to operation
With LED
• Press M to enter the Menu mode The red LED flashes alternately with the green LED1, which indicates the Menu item 1
• Press UP or DOW to select the desired Menu item Each press of the key moves one menu item forward (or back)
The flashing green LEDs indicate the selected menu item
LED test before configuration: Move from menu item 1 to 4 and inspect that each LED lights
• Press UP+DOWN together to confirm the selected menu item and enter the Parameter change mode for the selected
menu item
The red LED goes off and the remaining green LED indicates the parameter or state to be set
• To exit the Menu mode, press M again
Red and green LEDs extinguish when device is IN SERVICE If device remains in Menu mode, it still is OUT OF SERVICE and
AUTOSTART has to be initiated
If you select a menu but press no other keys for a few moments, the SRD switches automatically back to operation
1) Exception in Menu 6 (and at PROFIBUS Menu 10) No parameter indicated at first, but flashing rhythm with long green and short red phases This points to a sub-menu Then entry
into parameter selection as described
Operation
Page 43 August 2014 POS-UM-00010-EN-03