NORD Drivesystems BU0505 User Manual
Page 143
5 Parameters
BU 0505 GB-1013
143
P730
Field
(Field)
0 ... 100 %
Displays the actual field in the motor calculated by the FI. The basis for calculation are the motor
data P201...P209.
Pos : 358 /Anleit ungen/5. / 6. Parametrier ung [BU 0500 / BU 0200]/ Par ameter/ P700-P799/ Paramet er P731 – Akt ueller Par ameters atz @ 0\ mod_1328173520271_388. doc x @ 13054 @ @ 1
P731
Parameter set
(Actual parameter set)
0 ... 3
Shows the actual operating parameter set.
0 = Parameter set 1
1 = Parameter set 2
2 = Parameter set 3
3 = Parameter set 4
Pos : 359 /Anleit ungen/5. / 6. Parametrier ung [BU 0500 / BU 0200]/ Par ameter/ P700-P799/ Paramet er P732 – Str om Phas e U @ 0\ mod_1328173601208_388. doc x @ 13077 @ @ 1
P732
Phase U current
(U phase current)
S
0.0 ... 999.9 A
Displays the actual U phase current.
NOTE:
This value can deviate somewhat from the value in P719, due to the measurement
procedure used, even with symmetrical output currents.
Pos : 360 /Anleit ungen/5. / 6. Parametrier ung [BU 0500 / BU 0200]/ Par ameter/ P700-P799/ Paramet er P733 – Str om Phas e V @ 0\mod_1328173830046_388. doc x @ 13100 @ @ 1
P733
Phase V current
(V phase current)
S
0.0 ... 999.9 A
Displays the actual V phase current.
NOTE:
This value can deviate somewhat from the value in P719, due to the measurement procedure
used, even with symmetrical output currents.
Pos : 361 /Anleit ungen/5. / 6. Parametrier ung [BU 0500 / BU 0200]/ Par ameter/ P700-P799/ Paramet er P734 – Str om Phas e W @ 0\ mod_1328173871579_388.doc x @ 13123 @ @ 1
P734
Phase W current
(W phase current)
S
0.0 ... 999.9 A
Displays the actual W phase current.
NOTE:
This value can deviate somewhat from the value in P719, due to the measurement procedure
used, even with symmetrical output currents.
Pos : 363 /Anleit ungen/5. / 6. Parametrier ung [BU 0500 / BU 0200]/ Par ameter/ P700-P799/ Paramet er P735 – Dr ehzahl Dr ehgeber [ SK 54xE] @ 0\ mod_1328173990708_388.doc x @ 13169 @ @ 1
P735
[-01]
...
[-03]
Speed encoder
(Speed encoder)
S
-9999 ... 9999 rpm
Displays the actual rotation speed supplied by the incremental encoder. P301 / P462 / P605 must
be correctly set according to the type of encoder.
[-01] = Speed encoder 1, TTL encoder
[-02] = Speed encoder 2, HTL encoder
[-03] = Speed, absolute encoder, reserved for HTL encoder
Pos : 364 /Anleit ungen/5. / 6. Parametrier ung [BU 0500 / BU 0200]/ Par ameter/ P700-P799/ Paramet er P736 – Z wischenkreiss pannung @ 0\ mod_1328174969216_388.doc x @ 13192 @ @ 1
P736
D.c. link voltage
(DC link voltage)
0 ... 1000 V DC
Displays the actual link voltage.
Pos : 365 /Anleit ungen/5. / 6. Parametrier ung [BU 0500 / BU 0200]/ Par ameter/ P700-P799/ Paramet er P737 – Akt uelle Auslas tung Br ems wi derst and @ 0\ mod_1328175007763_388. doc x @ 13215 @ @ 1