NORD Drivesystems BU0040 - Manual (Page 16)

NORDAC Control and Parameter Boxes
16 Subject to technical alterations BU 0040 GB-0113
2.1.4 SK …-3E - built-in version
The SK CSX-3E and SK PAR3E are built-in versions of the parameter boxes described in Section 2.1.3. If they are
correctly installed in the front of the control panel they comply with protection class IP 54.
2.1.4.1 SimpleBox SK CSX-3E – Built-in Version
The SK CSX-3E SimpleBox is a compact control device for
installation in a control panel and direct connection to the
frequency inverter via the RJ12 diagnostic socket. A normal
RJ12 -patch cable ("Modular cable RJ12 (6/6) - RJ12 (6/6),
1:1 assignment") with a length of up to 3m can be used for
connection.
If the SimpleBox is supplied from a power source with a
higher voltage (e.g. 24V
DC
from SK 200E), the cable can be
considerably longer.
2.1.4.2 ParameterBox Version SK PAR-3E – Built-in Version
The SK CSX-3H ParameterBox is a compact control device
for installation in a control panel and direct connection to the
frequency inverter via the RJ12 diagnostic socket. A normal
RJ12 -patch cable ("Modular cable RJ12 (6/6) - RJ12 (6/6),
1:1 assignment") with a length of up to 3m can be used for
connection.
If the ParameterBox is supplied from a power source with a
higher voltage (e.g. 24V
DC
from SK 200E), the cable can be
considerably longer.