NORD Drivesystems BU0040 - Manual (Page 42)

NORDAC Control and Parameter Boxes
42 Subject to technical alterations BU 0040 GB-0113
2.4.2.2 Assignment of parameterisation box - frequency inverter
ParameterBox ParameterBox SimpleBox
SK PAR-2E SK PAR-2H SK PAR-3H SK PAR-3E
SK CSX-3H
SK CSX-3E
Frequency inverter Interface RS485 RS485 RS485 / USB RS485 RS485
SK 200E
1* 2* 1 1 1
SK TI4-TU-BUS
(BUS connection unit) 1 2 1 1 Not possible
SK 300E
Wiring to
connection
terminals,
4-lead
Direct
connection
with system
plug
3 3 Not possible
SK 500E
1 2 1 1 1
SK 700E
>22KW
or with option -RS2 1** 2** 1** 1** 1**
SK 700E
with customer interface
SK CU1-STD
+
Wiring to
connection
terminals,
4-lead
4 3 + 4 3 + 4 3 + 4
SK 750E
Not possible
Direct
connection
with system
plug
3 3 3
SK 750E
with customer interface
SK CU1-STD
+
Wiring to
connection
terminals,
4-lead
Direct
connection
with system
plug
3 3 3
Vector mc
Wiring to
connection
terminals,
4-lead
4 Not possible Not possible Not possible
Nord Con
5 + 8 + 9 6 + 8 + 9 7 Not possible Not possible
* The ParameterBox series SK PAR-2x can only access the SK 200E after a modification to the hardware.
The launch of the modified ParameterBox series was in the 4th quarter of 2009.
** SK 700E < 30KW: safe operation is only ensured with an external power supply to the ParameterBoxes.
Further details of the SK PAR 2H can be found in Section 2.1.1.2 Connection variants