Warning, Sk tu3-par or sk par-2x, Sk tu3-par or sk par-2h/2e – NORD Drivesystems BU0040 User Manual
Page 28
NORDAC Control and Parameter Boxes
28
Subject to technical alterations
BU 0040 GB-0113
Control of the inverter
The speed and direction of rotation of the inverter can be fully controlled via the ParameterBox. Different settings
are necessary according to the inverter series.
Series
Parameter setting (P509)
Comments
SK 200E
{0}
"Control terminal or keyboard"
Control with the ParameterBox is only possible if no enable has been carried out via
the control terminals.
(The interface which is used first has priority.)
SK 300E
{0}
"Control terminal or keyboard"
Control with the ParameterBox is only possible if no enable has been carried out via
the control terminals.
(The interface which is used first has priority.)
SK 500E
For the use of an SK PAR-2x or SK PAR-3x:
{2}
"USS"
No further control via the control terminals or the keyboard of a plugged in technology
unit is possible.
For the use of an SK TU3-PAR:
{0}
"Control terminal or keyboard"
Control with the ParameterBox is only possible if no enable has been carried out via
the control terminals. (The interface which is used first has priority.)
SK 700E
{4}
"USS"
No further control via the control terminals or the keyboard of a plugged in technology
unit is possible.
SK 750E
{4}
"USS"
No further control via the control terminals or the keyboard of a plugged in technology
unit is possible.
Vector mc
{0}
"Control terminal or keyboard"
Control with the ParameterBox is only possible if no enable has been carried out via
the control terminals.
(The interface which is used first has priority.)
If the frequency inverter is enabled in this mode, then the parameter set selected for this frequency inverter in the
Menu >Parameterisation< >Basic parameters< in the >Parameter set< parameter (P100) is used.
After changing the parameter set during operation, this must be activated with the buttons
or
. However, it is
safer to carry out the switchover at a standstill.
WARNING
Danger of injury if motor starts
The drive may start immediately after pressing the START key
!
DS
DE
NORD
DRIVESYSTEMS
OK
SK PAR-3H
STOP
(no enable)
START
(enable)
Rotation direction
reversal
Store current
frequency
Increase or
decrease frequency
No function
SK TU3-PAR or SK PAR-2x
The keyboard function is identical to that of SK PAR-3x
vector
R
DS DE
SK PAR 3H/3E
SK TU3-PAR or SK PAR-2H/2E
OK