NORD Drivesystems BU0040 - Manual (Page 25)

2 Parameter Boxes – Display and control
BU 0040 GB-0113 Subject to technical alterations 25
2.2.2 ParameterBox
2.2.2.1 Display
After the initial commissioning of the ParameterBox, a query is made as to whether the menu language should be
German or English
Then, or after each new commissioning of the Box an automatic "Bus-Scan" is performed. The ParameterBox
identifies the connected frequency inverter(s). The frequency inverter type and its current operating status can be
seen in the following display.
300E 0,75kW/3 BSC … 1
> NORDAC <
Frequency inverter
ONLINE I1 P1 Ready
In the standard display mode, 3 operating values and the current frequency inverter status can be displayed
simultaneously.
The operating values displayed can be selected from a list of 8 possible values (in Menu>Display</>Values for
display<(P1004)).
300E 0,75kW/3 BSC … 1
Fi/Hz U/V I/A
45.0 190 1.4
ONLINE
I1 P1 R RUNNING
Current status
of the inverter
Inverter type
Current actual
values for the
selected operating
values and their
applicable units
Current
ParameterBox status
Inverter
selected
Active parameters
in inverter
Current status of
the inverter
Inverter type
Menu structure level
Customer's interface,
special expansion