HP Designjet T3500 Production eMFP - Manual (Page 100)

Scan to file
1. Load the sheet with the printed side facing upwards (you can also load the sheet before step 1, if you
prefer). Align the center of the sheet approximately with the center of the scanner. Use the standard
size markings to help you.
NOTE: The maximum length of paper that the scanner can scan depends on the paper width and the
scan resolution. An alert is displayed if the maximum length is exceeded.
NOTE: Scanned images may be saved to PDF files with the PostScript upgrade.
2. Push the sheet into the insertion slot until you feel it contact the rollers. The scanner will automatically
grab the sheet and move it into position for scanning. If you feel that the sheet has loaded badly and
you want to try again, you can pull it out manually.
3.
At the front panel, go to the home screen and press , then select where you would like to store
the scanned image.
● In a USB flash drive
90 Chapter 9 Scanning ENWW