HP Designjet T3500 Production eMFP - Manual (Page 27)

Before you begin, check your equipment:
● The printer should be set up and on.
● The Ethernet switch or router should be on and functioning correctly.
● The printer and the computer should be connected to the network (see Connect the printer to your
network on page 14 ).
Now you can proceed to install the printer software and connect to your printer.
1.
Go to the front panel and press . Note the mDNS service name of your printer.
2. Insert the HP Start-up Kit DVD into your DVD drive.
3. Open the DVD icon on your desktop.
4. When the T3500 window appears on your screen, click Software and then Install.
5. Your Web browser opens to display the rest of the software installation procedure. You must select
Windows or Mac OS X software, and choose which specific software you want to install (by default, all of
it).
6. When the software has been installed, the HP Utility starts automatically, to set up a connection to your
printer. Follow the instructions on your screen.
7. In the Setup Assistant screen, look for your printer's mDNS service name (which you noted in step 1) in
the Printer Name column.
● If you find the right name, scroll sideways if necessary to see the Connection Type column, and
check that it shows Bonjour. Then highlight that line. Otherwise, continue searching further down
the list.
● If you cannot find your printer's name just click Continue and do the setup manually in your
System Preferences later on.
Click Continue.
8. Continue following the instructions on the screen.
9. When the HP Utility Setup Assistant has finished, you can remove the DVD from the DVD drive.
If the printer driver is already installed, the HP Utility Setup Assistant can be run at any time from the DVD.
Uninstall the printer software (Mac OS X)
During the previous Installation step, you have the option to select that . This should be available under
Hewlett-Packard in the system Applications folder.
IMPORTANT: The HP Uninstaller application will uninstall all HP Software installed in your system.
To delete the print queue only, select the Print & Scan dialog from the system preferences. Select the name
of the printer and click the – button.
ENWW Uninstall the printer software (Mac OS X) 17