HP Designjet T3500 Production eMFP - Manual (Page 74)

In manual mode:
● You can print only one page at a time. You must start each page manually from the front panel.
● You print with the stacker cover open, and stand in front of the printer to check the print as it emerges.
● With the stacker cover open, you have a better view of the print as it emerges, but the stacker cannot
guarantee that the print will follow the correct paper path, so you must watch over it to prevent
possible damage.
● You cannot scan or copy because the stacker cover is blocking the scanner.
● If the printer is left idle and in manual mode for more than 15 minutes, manual mode is cancelled, and
you are advised to close the stacker.
● You can exit manual mode from the front panel or by closing the stacker.
Manual mode is indicated in various front-panel screens by the icon.
Stacker pivoting cover separator
To improve stacking performance for papers below 75 gr/m2, activate the blue separators located in the
internal sides of the pivoting cover. Remember to deactivate them before stacking other paper types.
64 Chapter 6 Paper handling ENWW