HP Designjet T3500 Production eMFP - Manual (Page 193)

When is a job put on hold for paper?
If the paper mismatch action is set to Put job on hold (see Paper mismatch action on page 27 ), a job is put on
hold for paper in the following cases:
● The paper type that has been selected by the user is not currently loaded on the specified roll—or on
either of the rolls, if no roll has been specified.
● The paper type that has been selected by the user is loaded on the specified roll, but the drawing is too
large to fit on the roll—or on either of the rolls, if no roll has been specified.
If I load a new roll of paper, will jobs that were on hold for paper be automatically
printed?
Yes. Every time a new roll of paper is loaded, the printer will check if there are any jobs on hold for paper that
could be printed on the loaded roll.
I don’t like jobs being put on hold for paper. Can I prevent it?
Yes, this can be done from the front panel: see Paper mismatch action on page 27 .
I set the option “Paper mismatch action” to “Print anyway”, but some jobs are still
put on hold (Windows driver only)
If the Show print preview option is selected in the driver or the Embedded Web Server, jobs are put on hold
until you have checked the preview and resumed the job. Check that the Show print preview option is not
checked in the driver, and that there are no pending preview windows waiting for confirmation to continue
printing.
My job is exactly as wide as the roll of paper that is loaded on the printer, but is put
on hold for paper
Margins are managed in different ways depending on the file type:
● For HP-GL/2 and HP RTL files, by default, margins are included inside the drawing, so a 914 mm (36 in)
HP-GL/2 and HP RTL file can be printed on a 914 mm (36 in) roll of paper and will not be put on hold for
paper.
● For other file formats, such as PostScript, PDF, TIFF or JPEG, the printer assumes that margins need to
be added outside the drawing (as, in many cases, these formats are used for photographs and other
images that do not include margins). This means that, to print a 914 mm (36 in) TIFF, the printer needs
to add margins, and the drawing needs 925 mm (36.4 in) of paper to be printed; this would cause the job
to be put on hold if the paper that is loaded on the printer is only 914 mm (36 in) wide.
If you wish to print these file formats without adding extra margins outside of the drawing, the Clip
contents by margins option can be used. This option will force the margins to be set inside of the
drawing, so a 914 mm (36 in) TIFF can be printed on a 914 mm (36 in) roll of paper without being put on
hold. However, if there is no white space already included in the drawing’s borders, some contents could
be clipped because of the margins.
NOTE: If you choose the option Match exact size, your job will be printed only on paper whose width
exactly matches the width of the job.
ENWW An “on hold for paper” message 183