HP Designjet T3500 Production eMFP - Manual (Page 259)

Table 26-1 Text messages (continued)
Message Recommendation
Replace incorrect [color] cartridge Replace the cartridge. Check the supported ink cartridges and see
Handling ink cartridges and printhead on page 144 .
Reseat [color] cartridge Remove and reinsert the same cartridge. See Handling ink
cartridges and printhead on page 144 .
Table 26-2 Numerical error codes
Error code Recommendation
05.5:10 Update the printer's BIOS.
08:04 Restart the printer. If the problem persists, update the printer's firmware. See Update the firmware
on page 159 .
08:08 Retry the operation that you were attempting. If it fails again, restart the printer. If the problem
persists, update the printer's firmware. See
Update the firmware on page 159 .
09:01 Paper jam in the scanner. Remove all paper from the scanner and try again.
09:02 Calibrate the scanner. See Calibrate the scanner on page 171 .
09:04 Restart the printer. If the problem persists, update the printer's firmware. See Update the firmware
on page 159 .
39.1:01 Roll 1 has been unexpectedly unloaded. Reload the roll.
39.2:01 Roll 2 has been unexpectedly unloaded. Reload the roll.
61:01 The file format is wrong and the printer cannot process the job.
● Turn off the printer using the Power button at the front.
● Turn off the power switch at the rear.
● Disconnect the power cord.
● Reconnect the power cord and turn on the printer.
● Send the same job to the printer again.
● Ensure that the printer’s firmware is up to date. See Update the firmware on page 159 .
61:04.1, 61:04.2 Update your printer's firmware. See Update the firmware on page 159 .
61:08 Resend the job.
61:08.1 The job cannot be printed because it is password-protected.
61:08.2 The job cannot be printed because it contains errors. Resend the job from the Embedded Web
Server.
61:09 Resend the job.
ENWW 249