HP Designjet T3500 Production eMFP - Manual (Page 118)

You can then make adjustments using a lightness slider and three color sliders.
● The lightness slider simply makes the whole print lighter or darker.
● The color sliders can be used to fade or emphasize each of the primary colors in the print. The primary
colors may be red, green and blue; or cyan, magenta and yellow; depending on the color model used in
the image.
The Reset button restores each slider to its default central position.
Printing in grayscale
You can convert all colors in your image to shades of gray in the following ways:
● In your application program: many programs provide this option.
● In the Windows driver dialog: go to the Color tab and look at the Color Options section. Select Print in
Grayscale. You can also select Print in pure black and white if you want only black and white, without
gray shades.
● In the Mac OS X Print dialog: go to the Color Options panel and select Grayscale from the Mode drop-
down list. You can also select Pure Black and White if you want only black and white, without gray
shades.
● On the Embedded Web Server's Submit Job page: select Color, then set Color/Grayscale to Print In
Grayscale. You can also select Pure Black and White if you want only black and white, without gray
shades.
You can adjust the gray balance of your print under Windows:
● In the Windows driver dialog: select the Color tab, ensure that the Advanced color adjustments box is
checked, then press the Settings button beside it.
You will then be able to make adjustments using separate controls for highlights, midtones and shadows.
108 Chapter 12 Color management ENWW