HP Designjet T3500 Production eMFP - Manual (Page 90)

● In the Windows driver dialog: select the Paper/Quality tab, then select Use printer settings in the
Paper Type drop-down list.
● In the Mac OS X Print dialog: select the Paper/Quality panel, then select Any in the Paper Type drop-
down list.
NOTE: These are the default Paper Type selections.
Rescale a print
You can send an image to the printer at a certain size but tell the printer to rescale it to a different size
(normally larger). This may be useful:
● If your software does not support large formats
● If your file is too large for the printer's memory—in this case, you can reduce the paper size in your
software and then scale it up again using the front-panel option
You can rescale an image in the following ways:
● In the Windows driver dialog: go to the Layout/Output tab and look at the Resizing Options section.
◦ The Print document on option adjusts the image size to the paper size you have selected. For
example, if you have selected ISO A2 as the paper size and you print an A3-sized image, it is
enlarged to fit the A2 paper. If the ISO A4 paper size is selected, the printer reduces a larger image
to fit the A4 size.
◦ The % of actual size option enlarges the printable area of the original paper size (the page minus
the margins) by the percentage indicated, then adds the margins to create the output paper size.
● In the Mac OS X Print dialog (non-PostScript printers): select the Paper Handling panel, then Scale to
fit paper size, and select the paper size to which you want to scale the image. If you want to increase
the size of the image, make sure that the Scale down only box is unchecked.
● In the Mac OS X Print dialog (PostScript printers): select the Finishing panel, then Print document on,
and select the paper size to which you want to scale the image. For example, if you have selected ISO A2
as the paper size and you print an A3-sized image, it is enlarged to fit the A2 paper. If the ISO A4 paper
size is selected, the printer reduces a larger image to fit the A4 size.
● On the Embedded Web Server's Submit Job page: select Advanced settings > Resizing.
◦ The Standard and Custom options adjust the image size to the standard or custom paper size you
have selected. For example, if you have selected ISO A2 as the paper size and you print an A4-size
image, it is enlarged to fit the A2 paper. If the ISO A3 paper size is selected, the printer reduces a
larger image to fit the A3 size.
◦ The % of actual size option enlarges the printable area of the original paper size (the page minus
the margins) by the percentage indicated, then adds the margins to create the output paper size.
●
Using the front panel: press , then Default printing configuration > Paper options > Resize.
If you are printing to a single sheet, you must ensure that the image can actually fit onto the sheet, otherwise
the image will be clipped.
80 Chapter 8 Printing ENWW