HP Designjet T3500 Production eMFP - Manual (Page 200)

20 Troubleshooting print-quality issues
● General advice
● Print-quality troubleshooting wizard
● Recalibrate the paper advance
● Horizontal lines across the image (banding)
● Lines are too thick, too thin or missing
● Lines appear stepped or jagged
● Lines print double or in the wrong colors
● Lines are discontinuous
● Lines are blurred
● Line lengths are inaccurate
● The whole image is blurry or grainy
● The paper is not flat
● The print is scuffed or scratched
● Ink marks on the paper
● Black ink comes off when you touch the print
● Edges of objects are stepped or not sharp
● Edges of objects are darker than expected
● Horizontal lines at the end of a cut sheet print
● Vertical bands of different colors
● White spots on the print
● Colors are inaccurate
● Colors are fading
● The image is incomplete (clipped at the bottom)
● The image is clipped
190 Chapter 20 Troubleshooting print-quality issues ENWW