HP Designjet T3500 Production eMFP - Manual (Page 104)

● Size allows you to resize the print in two different ways: to a percentage of its original size, or to
fit a particular paper size. The default is 100% (its original size).
● Copy quality allows you to set the print quality to Best, Normal or Fast.
● Color options allows you to choose color or grayscale printing.
● Roll allows you to specify printing on roll 1 or roll 2, or you can choose Save paper, which
automatically chooses the narrowest roll on which the print will fit.
● Paper output allows you to send the print to stacker or basket.
● Content type allows you to optimize the scan for a line drawing, a photographic image, or a mixed
image.
● Original paper type allows you to specify the paper type on which the original image has been
printed. To optimize scan quality, ensure that this setting is correct.
● Blueprint invert allows you to generate a copied image with a light background. It is useful when
the original you intend to copy is a blueprint with a dark background. This option is available only if
the Original type is set to Blueprints.
● Back-ground removal allows you to remove unwanted background color. You can specify the
setting strength from 0 to 10.
● Contrast allows you to adjust the contrast level.
● De-skew the scanner has a built-in automatic de-skew algorithm, which measures the skew in the
original, and rotates the scanned image so that the result is perfectly straight.
● Copy margin layout clip content by margin (try to print the image with the same margins as the
original) and oversize: scan the image with margins, later the printing margins will be added so
more margins than the original had may be noticed.
● Full width margins are not detected doing a complete scan.
● Storage mode with two options Copy and delete (job is not stored in the job queue) and Copy and
store (the job is kept in the job queue).
NOTE: If you change the settings in this way, the changed settings apply to the current job but are not
saved permanently. You can change the default settings from the main menu: press , then Copy
preferences.
5. When you are satisfied with the copy settings, press anywhere on the screen to return to the previous
page, then press Start.
6. If two rolls are loaded, you can choose to print on either roll, or you can let the printer choose
automatically.
NOTE: The printer will automatically rotate the image by 90° if it can save paper by doing so.
7. When the scan is complete, will appear in order to eject the copied sheet.
94 Chapter 10 Copying ENWW