HP Designjet T3500 Production eMFP - Manual (Page 73)

TIP: Although you can remove sheets from the stacker while the printer is printing, you are recommended
to remove all the prints together while the printer is not printing. If you are collecting many plots, it is
recommended to do it with two people.
TIP: You can lock the stacker cover in the open position to collect special jobs. Make sure that you close it
afterwards.
TIP: If you want to use a photo paper for printing in normal printing mode to the stacker, you are
recommended to use an HP Instant-Dry Photo Paper.
Manual printing with the stacker open
The stacker's manual printing mode is designed to be used when you want the highest-quality print possible
on photo paper, and you are willing to stand in front of the printer to ensure it.
You can choose manual mode either for a particular job (for example, from the printer driver), or by putting
the printer into manual mode from the front panel.
● If you send a job with manual mode selected, the job is put on hold, and other jobs can continue
printing, until you select it for printing from the front panel (the front panel can guide you through this
process) and open the stacker cover.
● If you put the printer into manual mode from the front panel, all jobs in the queue are put on hold for
manual mode, and you can print them from the queue. When you exit manual mode, any jobs still in the
queue return to their previous status.
NOTE: When opening the stacker to enter manual mode, lock the stacker cover into the open position.
ENWW The stacker 63