HP Designjet T3500 Production eMFP - Manual (Page 207)

● The borders of colored blocks are wrongly colored.
To correct this kind of problem:
1. Align the printhead. See Align the printhead on page 240 .
2. Reseat the printhead by removing and then reinserting it. See Remove the printhead on page 149 and
Insert the printhead on page 153 .
Lines are discontinuous
If your lines are broken in the following way:
1. Check that you are using appropriate print-quality settings. See Printing on page 71 .
2. When printing on uncoated paper in Fast mode, try loading the paper as Bright Bond.
3. Align the printhead. See Align the printhead on page 240 .
4. Reseat the printhead by removing and then reinserting it. See Remove the printhead on page 149 and
Insert the printhead on page 153 .
ENWW Lines are discontinuous 197