HP Designjet T3500 Production eMFP - Manual (Page 32)

3. In the printer's Embedded Web Server, select the Setup tab and then Scan to network. See Access the
Embedded Web Server on page 46 .
Alternatively, in the HP Utility, select the Settings tab and then Scan to network. See Access the HP
Utility on page 46 .
4. On the Scan to Network page, click Add folder details, and fill in the various fields.
● Protocol may be FTP or CIFS (Windows).
● Folder type may be public or private. The folder type is displayed in both the Embedded Web
Server and the front panel with an icon. When you select a private folder, you must enter a
password in the front panel.
● Alias name is displayed in the front panel when you are choosing the scan destination. It may be
different from the network or FTP folder name.
● Set this network destination as a default or, only if installed, set this network destination as an
HP Designjet SmartStream folder (checkbox).
● Server name should contain the network name of the remote computer.
● Folder name should contain the share name of the folder.
● User name should contain the name of the 'scanner user'.
22 Chapter 3 Setting up the printer ENWW