HP Designjet T3500 Production eMFP - Manual (Page 174)

3. Gently wipe the glass plate and the surrounding area with a lint-free cloth dampened with water and
then wrung dry. A suitable cloth is provided with the printer.
CAUTION: Do not use abrasives, acetone, benzene or fluids that contain these chemicals. Do not spray
liquids directly onto the scanner glass plate or anywhere else in the scanner.
Do not worry about tiny droplets of water left on the glass: they will evaporate.
4. Optionally, for more thorough cleaning:
● Remove the glass plate and clean it on both sides. See Replace the scanner’s glass plate
on page 166 .
164 Chapter 17 Scanner maintenance ENWW