HP Designjet T3500 Production eMFP - Manual (Page 22)

◦ Update the printer's firmware, see Update the firmware on page 159
◦ Perform calibrations and troubleshooting
◦ Submit print jobs
◦ Manage the job queue, see Job queue management on page 96
◦ View job accounting information, see Retrieving printer usage information on page 139
◦ Change various printer settings
◦ Manage e-mail notifications
◦ Change permissions and security settings
◦ Set network destinations for scan
◦ Scan accounting
See Access the Embedded Web Server on page 46 and Access the HP Utility on page 46 .
NOTE: The HP Utility under Mac OS X and the HP Designjet Utility under Windows have similar functions and
are sometimes referred to collectively as the HP Utility in this guide.
NOTE: New versions of all printer software can be expected to appear from time to time. In some cases,
when you receive your printer there may already be later versions available on HP's website of some of the
software provided with it.
Turn the printer on and off
If you wish to turn the printer on or off or reset the printer, the normal and recommended method is to use
the
Power key on the front panel.
However, if you plan to store the printer for a long period or the Power key does not seem to work, you are
recommended to turn it off using the power switch at the rear.
To turn it back on, use the power switch at the rear.
When the printer is powered back on, it takes about 3 minutes to initialize and check and prepare the
printhead. Preparing the printhead takes about 75 seconds. However, if the printer has been off for 2 weeks
or more, preparing the printhead could take up to 7 minutes, plus 13 minutes if it needs a printhead recovery.
See also Sleep mode on page 11 and Change the auto-off setting on page 47 .
12 Chapter 1 Introduction ENWW